Surgery Instruments
Showing 601–700 of 810 results
-
Pointed Drill Guide 16cm (6 1/4″) for Dia. 4.5mm Protection Sleeve
-
Protection Sleeve 11cm (4 1/4″), Dia. 3.5mm, Applicable for Dia. 3.2mm Drill Bit and Dia. 2.7/3.5mm Tap
-
Protection Sleeve 11cm (4 1/4″), Dia. 4.5mm, Applicable for Dia. 4.5mm Drill Bit and Dia. 4.5mm Tap
-
Quadrangular Positioning Plate
-
QUATTRO Plaster Spreader 23 cm
-
Rack 246x256x60mm for Variable Plates Collection
-
Rack for Pins
-
RADOLF Nail Extracting Forceps 13.5cm
-
RALK Hand Drill with Jacobs Chuck and Wrench, Opening Up To Dia. 6,35mm, Longitudinally Bored, Light Metal Housing
-
Rampley Sponge Holding Forceps Straight (Modify) With-Ratchet
-
Rampley Sponge Holding Forceps Straight 25cm
-
Reamer (Awl) 14cm (5 1/2″), Square, with Hollow Handle
-
Reamer 14 cm
-
Reamer for Quick-Action Chuck 9 cm
-
Reamer for Three Jaw Chuck 9 cm
-
Reamer Square Hollow Handle 16.5 cm
-
Reconstructive Plate 2.7mm, Straight, Plate Thickness 3,1mm
-
Reconstructive Plate 3.5mm, Curved, Plate Thickness 3.6mm
-
Reconstructive Plate 3.5mm, Straight, Plate Thickness 2.8mm
-
Reconstructive Plate 4.5mm, Straight, Plate Thickness 2.9mm
-
REILL Wire Cutting Forceps TC 17.5cm
-
REinER Plaster Knife 18 cm
-
Ring Wrench 15cm (6″), Width Across Flats 11.0mm
-
RITCHEY Nail Starter 20 cm Cannulated Cannulation 2.5 mm
-
Rod Bender 18.5cm (7 1/4″), for 3.0mm Until 4.0mm, Small Bending Radius
-
Rose Burr 1.4mm Dia.
-
Round Nose Pliers Double Action 18cm
-
Rush Reamer for intramed Pins
-
RUST Amputation Saw, Complete with 4 Blades, 6mm, 8mm, 12mm
-
SATTERLEE Amputation Saw
-
SCHANZ Screws
-
Screw Driver 15cm (6″), Turnable, Self-Retaining, for Titanium Cross Head Screws Dia. 1.2mm
-
Screw Driver 16cm (6 1/4″), Turnable, Self-Retaining, for Titanium Cross Head Screws Dia. 1.7mm
-
Screw Driver 18cm (7″), Self-Retaining, for Titanium Cross Head Screws Dia. 2.0mm
-
Screw Driver 18cm (7″), Turnable, Self-Retaining, for Titanium Cross Head Screws Dia. 1.7mm
-
Screw Driver 19.5cm, Hexagonal 2.5mm, with Holding Sleeve, for 2.7/3.5/4.0mm Screws
-
Screw Driver 20cm/8″, Hexagonal 2.5mm, for Holding Sleeve, Used for Dia. 2.7/3.5/4.0mm Screws
-
Screw Driver Blade 5.5cm/2″, Hexagonal 1.5mm, Dental-Shaft Used for Dia. 1.5/2.0mm Screws
-
Screw Driver Blade 6.5cm, Self-Retaining, for Titanium Cross Head Screws Dia. 1.2mm
-
Screw Driver Blade 6.5cm/2 1/2″, Self-Retaining, with Hexagon Coupling, for Titanium Cross Head Screws Dia. 1.6mm
-
Screw Driver Blade 6.5cm/2½”, Self-Retaining, with Hexagon Coupling, for Titanium Cross Head Screws Dia. 2.0mm and Dia. 2,3mm
-
Screw Driver for Cannulas Screws
-
Screw Driver Handle 10.5cm (4 1/4″), Turnable, with Hexagon Connection, for Dia. 1.7mm and Dia. 2,3mm Screwdriver Blades
-
Screw Driver Handle 10cm (4″), Self-Retaining, for Dia. 1.7mm Until Dia. 2.7mm Screwdriver Blades
-
Screw Driver Handle 9.5cm, Turnable, with Dental Connection, for Dia. 1.2mm Screwdriver Blades
-
Screw Driver Handle Made of PTFE
-
Screw Driver Hexagon. 1.5 mm 25cm for Dia. 1.5/2.0mm Screws, Silicone Handle
-
Screw Driver Hexagonal 25cm (9 3/4″)
-
Screw Driver insert 10cm (4″), Torx Bit T 10, AO-Shaft, for Dia. 2.7/3.5mm Locking Screws
-
Screw Forceps 8 cm (3 1/4″), Self-Holding, for Dia. 1.5mm – 2.7mm Screws
-
Screw Forceps 8 cm (3 1/4″), Self-Holding, for Dia. 3.5mm – 6.5mm Screws
-
Screw-Holding Device for Screws Dia. 2.0mm
-
Screwdriver Blade 10cm (4″), Hexagonal 3.5mm, AO-Shaft, for 4.5/6.5mm Screws
-
Screwdriver Blade 10cm, Self-Retaining, Self-Retaining, with Hexagon Coupling, for Titanium Cross Head Screws Dia. 2.7mm
-
Screwdriver Blade 10cm, Self-Retaining, with Hexagon Coupling, for Titanium Hexagonal Head Screw Dia. 2.7mm
-
Seating Chisel
-
Seating Chisel 25 cm
-
Seating Chisel 26 cm
-
Seating Chisel 28.5 cm
-
Seating Chisel 32 cm
-
Semi Tubular Plate 4.5mm, Straight, Plate Thickness 1.1mm
-
SEUTin Plaster Shears 23 cm Serrated
-
SHERMAN Bone Plate
-
Short Barrel DHS Hip Screw Plate, 135 Deg, Angled, Barrel Length 25.0mm
-
Short Threaded Cancellous Screw, Dia. 4.0mm
-
Short Threaded Cancellous Screw, Dia. 6.5mm, Thread Length 16.0mm
-
Short Threaded Cancellous Screw, Dia. 6.5mm, Thread Length 32.0mm
-
Short Threaded Malleolar Screw, Dia. 4.5mm
-
Sims Maier Polypus Forceps 28cm
-
Sims Maier Polypus Forceps Curved 28cm
-
Skin Protecting Plate
-
Sklar Finger Ring Cutter
-
Sliding Guide for Seating Chisel 8 cm
-
Slotted Hammer 27 cm
-
Slotted Hammer 30 cm for Extraction Hook
-
SMITH PETERSEN Nail
-
SMITH PETERSEN Plate
-
SMITH-PETERSEN intertrochanteric Bone Plate
-
Spherical Burr
-
Sponge-And Dressing Forceps 240mm, Curved
-
Sponge-And Dressing Forceps 240mm, Straight
-
Spoon Plate 4.5mm, Plate Thickness 2.0mm, Head Width 34.0mm
-
STADLER Wire Bending Plier 16 cm
-
Standard Set Medium Plates 1.7mm
-
Standard Set Micro Plates 1.2mm
-
Standard Set Mini Plates 2.0mm
-
STEinMANN Pin, Trocar Point / Triangular Shaft
-
STILLE Hand Drills 20.5cm Complete
-
STILLE Hand Drills 20.5cm, alone without Drills
-
STILLE Plaster Cast Shear
-
stille plaster cast shear 24cm
-
STILLE SHERMAN Bone Drill 24cm, Complete with 3 Twist Drills
-
SVENN JOHANNSSON Impactor 30cm
-
SVENN JOHANNSSON Impactor 34cm
-
T-Buttress Plate 4.5mm, Plate Thickness 2.0mm
-
T-Handle 8.5cm (3 1/4″) for AO-Attachment with Quick Coupling
-
T-Handle with Quick Coupling
-
T-Plate 2.7mm, Plate Thickness 1.2mm
-
T-Plate 3.5mm, Large, Plate Thickness 2.0mm
-
T-Plate 3.5mm, Oblique Angled, Plate Thickness 1.5mm