Surgery Instruments
Showing 701–800 of 810 results
-
T-Plate 3.5mm, Plate Thickness 1.0mm
-
T-Wrench for Knowles Pins
-
Tap 10 cm (4″), AO-Shaft, for Cortical Screws Dia. 2.7mm Thread Pitch 1.0mm
-
Tap 11 cm (4 1/4″), AO-Shaft, for Cortical Screws
-
Tap 12.5 cm (5″), AO-Shaft, Short Thread, for Cancellous Screws Dia. 4.5mm, Thread Pitch 1.75mm
-
Tap 12.5cm (5″), AO-Shaft, Large Thread, for Cortical Screws Dia. 4.5mm, Thread Pitch 1.75mm
-
Tap 20cm/8″, with T-Handle, for Screws Dia. 6.5mm
-
Tap 23cm (9″), for Hip Screws, with Scale
-
Tap 5cm/2″, Dental Shaft
-
Tap Dia. 6.5 mm 20,0 cm Long, Pitch 2.75 mm
-
Tap for Cannulas Screws
-
Tap Handle for AO/ASIF Shaft Cannulated
-
Tap, Extra Long Thread, 18cm (7″) Dia. 4.5mm, AO-Shaft
-
Telescopic Wire Guide Only
-
Tension Device 9cm (3 1/2″), Span 20.0mm
-
Threaded Drill Sleeve 6cm, Dia. 2.0mm, for Drill Bit
-
Tibia Plate, Distal-Medial
-
Tibia Plate, Proximal-Lateral
-
Tip with Thread
-
Tissue Protector and Tap Sleeve for Drill Bits Dia. 2.5mm, Taps Dia. 3.5mm
-
Tissue Protector for Cannulas Screws
-
Titanium Broad Locking Plate 5.0mm, (Combi Holes), Straight, Angle-Stable
-
Titanium Calcaneus “B” Type Locking Plate 3.5mm, 15 Holes, 69mm Long, Angle-Stable
-
Titanium Calcaneus Locking Plate 3.5mm, Angle-Stable
-
Titanium Clavicle Hook Locking Plate 3.5mm, (Combi Holes), Angle-Stable
-
Titanium Distal Femur Locking Plate 5.0mm, Angle-Stable
-
Titanium Distal Fibula Locking Plate 3.5mm, (Combi Holes), Angle-Stable
-
Titanium Distal Humeral Locking Plate 3.5mm, Dorsolateral Anatomical, (Combi Holes), Angle-Stable
-
Titanium Distal Humeral Locking Plate 3.5mm, Medial Anatomical, (Combi Holes), Angle-Stable
-
Titanium Distal Humeral Locking Plate 3.5mm, Medial, Angle-Stable
-
Titanium Distal Tibia Locking Plate 3.5mm, Anterolateral, (Combi Holes), Angle-Stable
-
Titanium Distal Tibia Locking Plate 3.5mm, Medial, Angle-Stable
-
Titanium Distal Tibia Locking Plate 5.0mm, Lateral, Angle-Stable
-
Titanium Fullthreaded Cancellous Screw Dia. 4.0mm
-
Titanium Fullthreaded Cortical Screw Dia. 3.5mm, Self-Tapping
-
Titanium Fullthreaded Cortical Screw Dia. 4.5mm, Self-Tapping
-
Titanium Locking Distance Bolt Dia. 3.5 mm
-
Titanium Locking Distance Bolt Dia. 5mm
-
Titanium Locking Fullthreaded – Cortical Screw, Dia. 2.7mm, Angle-Stable / Self-Tapping
-
Titanium Locking Fullthreaded – Cortical Screw, Dia. 3.5mm, Angle-Stable / Self-Tapping
-
Titanium Locking Fullthreaded – Cortical Screw, Dia. 5mm, Angle-Stable/Self-Tapping
-
Titanium Locking Plate, Low Touch, (Combi Holes), Straight, 3.5mm, Small, Angle-Stable
-
Titanium Narrow Locking Plate 5.0mm, (Combi Holes), Straight, Low Touch, Angle-Stable
-
Titanium Olecranon Locking Plate 3.5mm, Anatomical, (Combi Holes), Angle-Stable
-
Titanium One-Third Tubular Locking Plate 3.5mm, Angle-Stable
-
Titanium Plates and Screws Holding Forceps 15cm (6″), Angled
-
Titanium Pre-Bent Radius Locking Plate 3.5mm, Angle-Stable
-
Titanium Pre-Bent Radius Locking Plate 3.5mm, Angle-Stable
-
Titanium Proximal Humeral Locking Plate 3.5mm, Angle-Stable
-
Titanium Reconstruction Locking Plate, Straight, 3.5mm, (Combi Holes), Angle-Stable
-
Titanium Reconstruction Locking Plate, Straight, 3.5mm, Angle-Stable
-
Titanium T-Locking Plate 3.5mm, Angled, Angle-Stable
-
Titanium T-Locking Plate, Oblique Angled 3.5mm, Angle-Stable
-
Titanium Tibia Locking Plate 5.0mm, Lateral, Proximal, Angle-Stable
-
Titanium Tibia Locking Plate 5.0mm, Medial, Proximal, Angle-Stable
-
Titanium Tibia T-Locking Plate 5.0mm, Angle-Stable
-
Titanium Washer Dia. 5mm Outside Dia. 13.0mm, inside Dia. 7.0mm for Standard Titanium Screws Dia. 4.5/6,5 mm
-
Titanium Washer Outside Dia. 6.0mm, inside Dia. 4.0mm for Standard Titanium Screws Dia. 3.5mm
-
TITANIUM Wires, 10m
-
Torniquet / Compression Apparatus Complete Pneumatic incl. Upper Arm Cuff 57 X 9 cm and Thigh Cuff 96 X 13 cm, Both with Latex-Free Bladders
-
Torque Limiting Attachment 20cm/8″ for AO-Attachment, with Quick coupling, Torque Limiting 1.5 Nm
-
Torque Limiting Attachment 20cm/8″ for AO-Attachment, with Quick coupling, Torque Limiting 2.5 Nm
-
TOTI Trephine Dia. 8.0mm, Borchardt Shank
-
Trans buccal Drill Guide 2.0mm System Consisting of Handle with Cannula, Cheek Retractor, Trocar, Drill Guide
-
Transbuccal Set
-
Trephine Fig.5, Dia. 10 mm
-
Triangular Positioning Plate
-
Triple Drill Guide for All 130 Deg, Angled Blade Plates
-
Triple Reamer for DCS Supracondylar Plates
-
Triple Reamer for DHS Plates
-
Twist Drill
-
Twist Drill
-
Twist Drill 6 Each
-
Twist Drill Long Bronchoscopy
-
Twist Drill Short Bronchoscopy
-
Ulrich Cotton Swab Forceps With Ratchet Curved
-
Ulrich Cotton Swab Forceps With Ratchet Straight
-
Universal Drill Guide 14cm (5 1/2″) for Neutral and Compression Position, Applied for Dia. 2.5mm Drill Bit and Dia. 3.5mm Tap
-
Universal Wire Extracting Forceps 20cm Slip Joint Pliers
-
Washer for Cannulated Screws 7 mm
-
Washer Outside Dia. 10.0mm, inside Dia. 5.0mm for Cancellous Screws Dia. 6.5mm
-
Washer Outside Dia. 13.0mm, inside Dia. 6,8mm for Cancellous Screws Dia. 6.5mm
-
Washer Outside Dia. 7.0mm, inside Dia. 4.0mm for Cancellous Screws Dia. 3.5/4.0mm
-
WIGMORE Plaster Saw 19 cm
-
WILBERG Epiphyseal Staples
-
WILLIAMS Screw Driver A. Holder, Single Head
-
Wing Screw Alone
-
Wire and Nail Extracting Forceps
-
Wire Cutter (Side Cutter) TC 24 cm for Soft Wire Until Dia. 2.5 mm for Hard Wire Until Dia. 2 mm
-
WIRE CUTTER PLIERS
-
Wire Cutting and Bending Forceps
-
Wire Cutting Forceps 18 cm Max Dia. 1.5 mm Hard Wire Max Dia. 2 mm Soft Wire
-
Wire Cutting Plier 18.5cm, TC for Soft Wires Up to Dia. 2.5mm for Hard Wires Up To Dia. 1.5mm
-
Wire Cutting Plier 18cm (7″), Curved, Double Articulated, Hard Wires Up to Dia. 1.6mm, Soft Wires Up to Dia. 2.0mm
-
Wire Cutting Pliers 24cm Dia. 4.0mm for Soft
-
Wire Guide
-
Wire Guide Telescopic Only
-
Wire Passer, POM Handle, Max Cap 11 Gauge
-
Wire Tightener with Clamping Jaws, for Wire Traction Bows
-
Wire Traction Bow, with 3 Traction Hooks (2x Large, 1x Small)




































































































