Orthopedics Instruments
Showing 301–399 of 399 results
-
Screw Driver Hexagon. 1.5 mm 25cm for Dia. 1.5/2.0mm Screws, Silicone Handle
-
Screw Driver Hexagonal 25cm (9 3/4″)
-
Screw Driver insert 10cm (4″), Torx Bit T 10, AO-Shaft, for Dia. 2.7/3.5mm Locking Screws
-
Screw Forceps 8cm (3 1/4″), Self-Holding, for Dia. 1.5mm – 2.7mm Screws
-
Screw Forceps 8cm (3 1/4″), Self-Holding, for Dia. 3.5mm – 6.5mm Screws
-
Screw-Holding Device for Screws Dia. 2.0mm
-
Screwdriver Blade 10cm (4″), Hexagonal 3.5mm, AO-Shaft, for 4.5/6.5mm Screws
-
Seating Chisel
-
Seating Chisel 25 cm
-
Seating Chisel 26 cm
-
Seating Chisel 28.5 cm
-
Seating Chisel 32 cm
-
SEUTin Plaster Shears 23 cm Serrated
-
Short Barrel DHS Hip Screw Plate, 135 Deg, Angled, Barrel Length 25.0mm
-
Skin Protecting Plate
-
Sklar Finger Ring Cutter
-
Sliding Guide for Seating Chisel 8 cm
-
Slotted Hammer 27 cm
-
Slotted Hammer 30 cm for Extraction Hook
-
SMITH PETERSEN Nail
-
SMITH PETERSEN Plate
-
SMITH-PETERSEN intertrochanteric Bone Plate
-
Spherical Burr
-
STADLER Wire Bending Plier 16 cm
-
Standard Set Medium Plates 1.7mm
-
Standard Set Micro Plates 1.2mm
-
Standard Set Mini Plates 2.0mm
-
STEinMANN Pin, Trocar Point / Triangular Shaft
-
STILLE Hand Drills 20.5cm Complete
-
STILLE Hand Drills 20.5cm, alone without Drills
-
STILLE Plaster Cast Shear
-
stille plaster cast shear 24cm
-
STILLE SHERMAN Bone Drill 24cm, Complete with 3 Twist Drills
-
SVENN JOHANNSSON Impactor 30cm
-
SVENN JOHANNSSON Impactor 34cm
-
T-Handle 8.5cm (3 1/4″) for AO-Attachment with Quick Coupling
-
T-Handle with Quick Coupling
-
T-Wrench for Knowles Pins
-
Tap 10cm (4″), AO-Shaft, for Cortical Screws Dia. 2.7mm Thread Pitch 1.0mm
-
Tap 11cm (4 1/4″), AO-Shaft, for Cortical Screws
-
Tap 12.5cm (5″), AO-Shaft, Large Thread, for Cortical Screws Dia. 4.5mm, Thread Pitch 1.75mm
-
Tap 12.5cm (5″), AO-Shaft, Short Thread, for Cancellous Screws Dia. 4.5mm, Thread Pitch 1.75mm
-
Tap 20cm/8″, with T-Handle, for Screws Dia. 6.5mm
-
Tap 23cm (9″), for Hip Screws, with Scale
-
Tap 5cm/2″, Dental Shaft
-
Tap Dia. 6,5 mm 20,0 cm Long, Pitch 2.75 mm
-
Tap for Cannulas Screws
-
Tap Handle for AO/ASIF Shaft Cannulated
-
Tap, Extra Long Thread, 18cm (7″) Dia. 4.5mm, AO-Shaft
-
Telescopic Wire Guide Only
-
Tension Device 9cm (3 1/2″), Span 20.0mm
-
Threaded Drill Sleeve 6cm/?”, Dia. 2.0mm, for Drill Bit
-
Tip with Thread
-
Tissue Protector and Tap Sleeve for Drill Bits Dia. 2.5mm, Taps Dia. 3.5mm
-
Tissue Protector for Cannulas Screws
-
Torniquet/Compression Apparatus Complete Pneumatic incl. Upper Arm Cuff 57 X 9 cm and Thigh Cuff 96 X 13 cm, Both with Latex-Free Bladders
-
Torque Limiting Attachment 20cm/8″ for AO-Attachment, with Quick coupling, Torque Limiting 1.5 Nm
-
Torque Limiting Attachment 20cm/8″ for AO-Attachment, with Quick coupling, Torque Limiting 2.5 Nm
-
TOTI Trephine Dia. 8.0mm, Borchardt Shank
-
Trans buccal Drill Guide 2.0mm System Consisting of Handle with Cannula, Cheek Retractor, Trocar, Drill Guide
-
Transbuccal Set
-
Trephine Fig.5, Dia. 10 mm
-
Triple Drill Guide for All 130 Deg, Angled Blade Plates
-
Triple Reamer for DCS Supracondylar Plates
-
Triple Reamer for DHS Plates
-
Twist Drill
-
Twist Drill
-
Twist Drill 6 Each
-
Twist Drill Long Bronchoscopy
-
Twist Drill Short Bronchoscopy
-
Universal Drill Guide 14cm (5 1/2″) for Neutral and Compression Position, Applied for Dia. 2.5mm Drill Bit and Dia. 3.5mm Tap
-
Universal Wire Extracting Forceps 20cm Slip Joint Pliers
-
WIGMORE Plaster Saw 19 cm
-
WILBERG Epiphyseal Staples
-
WILLIAMS Screw Driver A. Holder, Single Head
-
Wing Screw Alone
-
Wire and Nail Extracting Forceps
-
Wire Cutter (Side Cutter) TC 24 cm for Soft Wire Until Dia. 2.5 mm for Hard Wire Until Dia. 2 mm
-
WIRE CUTTER PLIERS
-
Wire Cutting and Bending Forceps
-
Wire Cutting Forceps 18 cm Max Dia. 1.5 mm Hard Wire Max Dia. 2 mm Soft Wire
-
Wire Cutting Plier 18.5cm, TC for Soft Wires Up to Dia. 2.5mm for Hard Wires Up To Dia. 1.5mm
-
Wire Cutting Plier 18cm (7″), Curved, Double Articulated, Hard Wires Up to Dia. 1.6mm, Soft Wires Up to Dia. 2.0mm
-
Wire Cutting Pliers 24cm Dia. 4.0mm for Soft
-
Wire Guide
-
Wire Guide Telescopic Only
-
Wire Passer, POM Handle, Max Cap 11 Gauge
-
Wire Tightener with Clamping Jaws, for Wire Traction Bows 33.512.XX
-
Wire Traction Bow, with 3 Traction Hooks (2x Large, 1x Small)
-
Wire Twister Automatic for Oral Surgery, 15 cm
-
Wire Twisting Forceps 15 cm TC
-
Wire Twisting Forceps 15cm TC
-
Wire Twisting Forceps 15cm, TC
-
WOLFF Plaster Cast Breaker
-
Wrench
-
Wrench 11mm
-
Wrench for Nuts 8 mm
-
Wire Cutter Heavy Duty
-
Finger Nail without Tips