Orthopedics Instruments
Showing 1–100 of 399 results
-
ADERER Plate Bending Plier 12cm (4 3/4″), Modified, for Micro Plate
-
ADSON Drill Guide and Protecting Forceps 15cm (6″)
-
Aiming Device with Tip 3.5 mm
-
ALBEE Burr Olive Shape
-
ALBEE Burr, Pointed Dia. 7.0mm
-
BAUMGARTNER Wire Twisting Forceps TC 20cm
-
BEESON Plaster Spreader 30 cm
-
Bender for Flexible Medullary Nails 24cm
-
Bending Forceps 13.5cm/5?”, for Mini Bone Plates 1.5mm/2.0mm
-
Bending Iron 12.5cm (5″), for Mini Bone Plates 1.5mm/2.0mm
-
Bending Iron 14cm (5 1/2″), Left for Bone Plates 2.7mm/3.5mm
-
Bending Iron 14cm (5 1/2″), Right for Bone Plates 2.7mm/3.5mm
-
Bending Iron 25cm (10″), Double for Large Bone Plates 4.5mm/6.0mm
-
Bending Iron for Kirschner Wires
-
Bending Pliers 22.5cm/8?”, for Small Bone Plates 2.7mm/3.5mm
-
Bending Pliers 25.5cm/10″, for Plates Up To 3.2mm
-
Bending Pliers 25cm For Straight Plates with interchangeable insert
-
Bending Press 43cm/17″, for Large Bone Plates Up To 6.0mm
-
Bending Template
-
BERGMANN Plaster Cast Saw
-
BERRY Forceps Wire Twisting 18.5cmtc Heavy Pattern
-
Blade Plates
-
BLOUNT Bone Staple Extractor
-
BLOUNT Bone Staple Impactor
-
BLOUNT Bone Staple inserter
-
BOEHLER Extension Bow
-
BOEHLER Nail
-
Bolt Cutter 57.5cm (22 1/2″), Max Hard Wires Dia. 6.5mm, with interchangeable Edges and Detachable Handles
-
Bone Biopsy Trephine, 170 mm (6 3/4″)
-
Bone Hand Drill with Jacobs Chuck Jacobs-Chuck
-
Bone Wire Soft 10 M
-
BORCHARDT Burr, Oval Dia. 13.0mm, Olive Shape, Borchardt Shank
-
Cardanic Wrench 18.5cm (7 1/4″), Width Across Flats 11.0mm, Applicable
-
CASPAR Depth Gauge 22.5 cm
-
CASPAR Screws Driver BALL ENDED
-
Centering Sleeve 7cm (2 3/4″), Dia. 1.6mm for K-Wire Dia. 1.6x150mm
-
Centering Sleeve 7cm (2 3/4″), Dia. 2.0 mm, for K-Wire Dia. 2,0x190mm
-
CHARRIERE Amputation Saw 35cm (13 3/4″), with 3 interchangeable Saw Blades: 12.0mm, 15.0mm and 18.0mm
-
CHARRIERE Blade Saw
-
CHAVE HEXAGONAL 2.5mm 10cm 33.629.25
-
Cheek Retractor
-
Combination Wrench, Key Width No. 10
-
Compression Device 6cm (2 1/4″), for 8.0mm Screws
-
Conical Burr, Borchardt Shank
-
Cortex Reamer
-
Countersink 12cm (4 3/4″), Dia. 3.2mm, AO-Shaft, for Dia. 4.5mm Screws
-
Countersink 7cm (2 3/4″), Dia. 2.0mm, AO-Coupling, for Dia. 2.7/3.5/4.0mm Screws
-
Countersink Mini 5.5cm/2″, Dia. 1,1cm, Dental-Shaft, for Dia. 1.5/2.0mm Screws
-
Countersink with T-Handle 18cm (7″), for Dia. 4.5/6.5mm Screws
-
Coupling Screw Short, for Guide Shaft (36.926.00)
-
Coupling Screw Used for Wrench (36.930.00)
-
Coupling Screw Used for Wrench (36.930.01)
-
CUSHinG Flat Burr with HUDSON Fitting
-
Cutter Oval
-
Cutter Spherical.
-
Cutter, Wire and Nails
-
D’ERRICO Drill Dia. 16mm
-
DCS Supracondylar Plate, 95 Deg, Angled, Barrel Length 25.0mm
-
DEMEL Wire Conductor
-
DEMEL Wire Tightener 27cm
-
Depth Gauge 15cm (6″), Up To 50.0mm
-
Depth Gauge 16cm (6 1/4″), Up To 50.0mm, for 2.7/3.5/4.0mm Screws
-
Depth Gauge 28,0 cm/11″, with Protection Sleeve, Up To 110.0 mm, for 4.5/5,0/6,5 mm Screws
-
Depth Gauge 28cm/11″, Up To 110 mm, for 4.5/5,0/6.5mm Screws
-
Depth Gauge for Mini Screws 11cm (4 1/4″), Up To 30.0mm, for Dia. 1.5/2.0mm Screws
-
DHPS Lag Screw
-
DHS Compression Screw 36.0mm
-
DiaMant Wire Cutter 16cm (6 1/4″) for Wires Up To Dia. 1.5mm
-
DIMEDA Finger Ring Cutter 18cm (7″)
-
Direct Measuring Device 12cm (4 3/4″), for Kirschner Wires Dia. 2.0 mm
-
Direct Measuring Device 8cm (3 1/4″), for K-Wires Dia. 1.6 mm
-
Double Drill Guide 14 cm/5?”, Applicable for Dia. 3.2mm Drill Bit and Dia. 6.5mm Tap
-
Double Open-Ended Wrench Width Across Flats 14 X 17mm
-
DOYEN Ball Burr, Borchardt Shank
-
DOYEN Conical Burr 12.0mm, Borchardt Shank
-
DOYEN Cylinder Burr, Borchardt Shank
-
DOYEN Spherical Burr Long
-
Drill Bit Cannulated, AO Coupling, P=10 Pieces
-
Drill Bit Cannulated, Straight Shank P=10 Pieces
-
Drill Bit Dia. 1.0mm, Total Length 76.0mm, Twist Length 15.0mm, Useable Length 15.0mm, AO Coupling, P=10 Pieces
-
Drill Bit, AO Coupling P=10 Pieces
-
Drill Bit, AO Coupling, P=10 Pieces
-
Drill Bit, AO Coupling, P=10 Pieces
-
Drill Bit, AO Coupling, P=10 Pieces
-
Drill Bit, AO Coupling, P=10 Pieces
-
Drill Bit, Cylindrical, Straight Shank, P=10 Pieces
-
Drill Bit, Dental Coupling P=10 Pieces
-
Drill Bit, Stryker Coupling P=10 Pieces
-
Drill Guide Adjustable To 135 Deg, /140 Deg, /145 Deg, /150 Deg,
-
Drill Guide and Drill Sleeve for Drill Bits Dia. 2.0mm
-
Drill Guide Angled for DCS Supracondylar Plates
-
Drill Guide for Round-Holes Plates 11.5cm (4 1/2″), Dia. 3.2 mm, for Dia. 3.2mm Drill Bit
-
Drill Guide Hip 60mm Neut./Ecc for Drill Bit Dia. 3.2 mm
-
Drill Sleeve
-
Drill Sleeve for Drill Bits Dia. 2.0mm and Dia. 2.7mm Taps
-
Drill Sleeve for Drill Bits Dia. 2.5mm, and 3.5mm Screws
-
Drill Sleeve For Round Holes Plate 60mm 13 cm
-
Drill Sleeve for Tension Device 5cm/2″, for Drill Bit Dia. 3.2mm
-
Drill Sleeve Mini 10.5cm (4 1/4″), for Drill Bits Dia. 1,1/1.5mm
-
Dynamic Hip Screw Plate (DHS), Angled, Barrel Length 38.0mm