Orthopedics Instruments
Showing 101–200 of 399 results
-
Dynamic Hip Screw Plate (DHS), Angled, Barrel Length 38.0mm
-
ENGEL Plaster Cast Saw
-
ESMARCH Compression Bandage
-
ESMARCH Plaster Knife 18 cm
-
Extension Hooks Large
-
Extension Hooks Small
-
Extraction Forceps for Wire Drills
-
Extraction Hook
-
Extraction Hook 1 Prong
-
Extraction Hook 2 Prongs
-
Extractor for Femoral Head 23 cm
-
Final Impactor 20.5 cm
-
Finger Extraction Sleeve Bast
-
Finger Extraction Sleeve Wire
-
Finger Nail Perforator Complete with 3 Tips 9.5 cm
-
Fingering Saw Forceps Dia. 30 mm 17 cm
-
Fixation Disc for Wire Drills (1 Pair)
-
Flat Burr Dia. 25.0mm, Borchardt Shank
-
FLAT Drill Cannulated 5.0 mm Diameter
-
Flat Drill with Eye
-
Flat Nose Plier, Pointed 19.5cm
-
Flat Nose Pliers 14cm One Jaw Smooth / One Jaw Serrated
-
Flat Nose Pliers 18cm (7″), Closing in Parallel, with Lateral Wire Cutter for Wires Up To Max. Dia. 1.6mm
-
Flat Nose Pliers 3 mm 14 cm
-
Flat Nose Pliers Compound Action, 18cm Parallel Grip
-
Flat Nose Pliers Parallel 10 mm 17 cm
-
Flat Nose Pliers Serrated
-
Flat Nose Pliers Serrated Jaws 14cm
-
Flat Nose Pliers Serrated Taper 19 cm
-
Flat Nose Pliers, 18cm TC Parallel Grip
-
Flexible Reamer 480mm, AO Coupling
-
Flexible Reamer 480mm, Coupling HARRIS
-
Flexible Reamer 480mm, Coupling HUDSON
-
Flexible Reamer, Coupling Din 58809, Round Head, with Coupling Nut
-
Forceps Wire Holding Lateral Jaws TC
-
Gauge for Drill Bits and Screws
-
Gauge for KIRSCHNER Wires Dia. 0.6mm-3.0mm
-
Grip (Seizing) Forceps SS
-
Guide Pin
-
Guide Pin 23cm (9″), Dia. 2.5mm P=10 Units
-
Guide Shaft for Coupling Screw
-
Guide Sleeve 16cm (6 1/4″), Long, for Screwing
-
Guide Sleeve 8.5cm (3 1/4″), Short for Tapping
-
Guide Wire
-
Guide Wire, Dia. 230mm with 10mm Thread
-
HACKSTOCK Flat Nose Pliers 16cm with Longitudinal Groove
-
HAGLUND STILLE Plaster Spreader 28 cm
-
Hand Drill with T-Handle and Quick Coupling Chuck, Opening Up To Dia. 4.0mm, Longitudinally Bored
-
Hand Drill with T-Handle, Jacobs Chuck and Wrench, Opening Up To Dia. 6,35mm, Longitudinally Bored
-
Hand Drill with Telescope Guide
-
Handle with Dental Coupling 10.5cm (4 1/4″)
-
Handle with Quick Coupling 11cm (4 1/4″), for AO-Shaft
-
HARRIS Wire Knot Tightener 25cm Suitable for 18- and 20-Gauge Wires
-
HARVEY Wire Cutting Pliers, 235 mm
-
HELFERICH BIER Amputation Saw, Complete with 3 Blades, 4mm, 6mm, 8mm
-
HENNIG Plaster Spreader 28 cm
-
Hercules Cutter Double Action 11?, Tungsten Carbide Jaws, Silicone inserts, Cuts 2.0mm-3.5mm [.079?-.138?]
-
Hercules Cutter Double Action 7″, Tin Tungsten Carbide Jaws, Silicone inserts, Maximum Capacity 2.2mm [.087″]
-
Hercules Cutter Double Action 9?, Tungsten Carbide Jaws, Silicone inserts, Maximum Capacity 3.0mm [.118?] Titanium Alloy Pins
-
HERCULES Spare Part Set 1 Pair of TC- Blades, 2 Pairs of Screws and 1 Allen Key for Hercules Cutter
-
HERMANN Plaster Spreader 48 cm
-
Hex Key, Angled, Key Width No. 3.5
-
Holding Clips for Small and Middle Plates
-
Holding Forceps for Small Plates
-
Holding Sleeve for Screw Driver
-
Holding Sleeve for SCREWS DRIVER
-
Hook 16cm (6 1/4″), Sharp
-
HOPKinS Plaster Knife 20 cm
-
HUDSON Brace 27cm Complete
-
HUDSON Brace Only
-
HUDSON Conical Burr No 1, Dia. 9mm
-
HUDSON Conical Burr No 2, Dia. 14mm
-
HUDSON Extension Piece Fig.1
-
HUDSON Extension Piece Fig.2
-
HUDSON Spherical Burr No 3, Dia. 16mm
-
HUDSON Spherical Burr No 4, Dia. 22mm
-
HUDSON Twist Drill
-
HUDSON Twist Drill 2.0 mm
-
Impactor
-
Impactor
-
Impactor 26cm (10 1/4″)
-
Impactor and Extractor 27 cm
-
insert Drill Sleeve 2.7/2.0 mm
-
intramedullary Nail Flexible
-
ISSELin Bone Awl 16.5 cm
-
ISSELin Bone Awl 16.5 cm with Eye
-
JEWETT Bending Iron 4 Holes
-
JEWETT Nail
-
JEWETT Nail Impactor Extractor
-
KIRSCHNER Drill with Wire Guide
-
KIRSCHNER U.S. Wire Traction Bow, with 3 Traction Hooks
-
KIRSCHNER Wire 15cm (6″), ?Dia. 1.6mm, Trocar Point, Round Shaft
-
KIRSCHNER Wire 19cm (7 1/2″), ?Dia. 2.0mm, Trocar Point, Round Shaft P=10 Units
-
KIRSCHNER Wire Traction Bow, with 3 Traction Hooks (2x Large, 1x Small), without Wire Tightener
-
KIRSCHNER Wiredrill Lancet Point Flat End, P=10 Units
-
KIRSCHNER Wiredrill Trocar Point Flat End, P=10 Units
-
KIRSCHNER Wiredrill Trocar Point Round End, P=10 Units
-
KIRSCHNER Wiredrill Trocar Point Round End, P=10 Units
-
KIRSCHNER Wiredrill Trocar Point Round End, Threaded Wires 15mm P=10 Units
-
KIRSCHNER Wiredrill Trocar/Trocar-Point, P=10 Units

































































































